1750Series
icengineworksTM MODELING BLOCK SETS.
(this page is being updated frequently, thank you for your patience).
The icengineworksTM modeling blocks come in full-engine sets based on the engine layout and its
number of cylinders. Please consult the table below for the types of block
included per
cylinder according to the engine layout.
Each set includes one (1)
icengineworksTM modeling block adapter per
cylinder.
As an example, the 1750V8L set includes 280
icengineworksTM modeling blocks (15x straight, 6x
2"-CLR, 6x 3"-CLR, 4x 4"-CLR, and 4x 6"-CLR per cylinder, times 8 cylinders) plus 8 starter
tube/icengineworksTM
modeling block adapters (one per
cylinder).
|
icengineworksTM modeling block type and quantity per cylinder according to its engine layout |
||||||
| 1750Series | straight block | 2"-CLR block | 3"-CLR block | 4"-CLR block | 6"-CLR block | total blocks/cyl. |
| LONGITUDINAL | 15 | 6 | 6 | 4 | 4 | 35 |
| TRANSVERSE | 6 | 9 | 9 | 6 | 5 | 35 |
| STREET BIKE | 33 | 7 | 7 | 4 | 4 | 55 |
| CUSTOM* | your choice | your choice | your choice | your choice | your choice | 35 |
*custom sets require a small service fee of $ 75.00 per set.
20-pc and 40-pc Add-On sets of additional modeling blocks are
available as well. These sets are very convenient for those users seeking to
expand existing sets, replace worn out or lost modeling blocks or when modeling
exhaust headers with various OD steps. More on these at the end of the table
below.
For dealer inquiries, go to our dealer inquiries
section.
NOTE: INTERNATIONAL ORDERS, please do not use this
site to order. Email your order to
be replied with shipping costs and payment information. You may also fax it to
(512) 858 2282.
|
1750Series icengineworksTM Modeling Block Sets, 1-3/4" OD (44.5mm) |
|||||
| part no. | photo | description | in stock | US$ | buy |
| 1750V2H | 1750Series icengineworksTM 2-cyl, 110-pcs Modeling Block Set STREET BIKE | yes | $800.00 | ||
| 1750L4L | 1750Series icengineworksTM 4-cyl, 140-pcs Modeling Block Set LONGITUDINAL | yes | $950.00 | ||
| 1750L4T | 1750Series icengineworksTM 4-cyl, 140-pcs Modeling Block Set TRANSVERSE | yes | $950.00 | ||
| 1750L6L | 1750Series icengineworksTM 6-cyl, 210-pcs Modeling Block Set LONGITUDINAL | yes | $1,100.00 | ||
| 1750V6L | 1750Series icengineworksTM 6-cyl, 210-pcs Modeling Block Set LONGITUDINAL | yes | $1,100.00 | ||
| 1750V6T | 1750Series icengineworksTM 6-cyl, 210-pcs Modeling Block Set TRANSVERSE | yes | $1,100.00 | ||
| 1750V8L | 1750Series icengineworksTM 8-cyl, 280-pcs Modeling Block Set LONGITUDINAL | yes | $1,300.00 | ||
| 1750V8T | 1750Series icengineworksTM 8-cyl, 280-pcs Modeling Block Set TRANSVERSE | yes | $1,300.00 | ||
| 1750V10L | 1750Series icengineworksTM 10-cyl, 350-pcs Modeling Block Set LONGITUDINAL | yes | $1,500.00 | ||
| 1750V12L | 1750Series icengineworksTM 12-cyl, 420-pcs Modeling Block Set LONGITUDINAL | yes | $1,700.00 | ||
| 1750CUSTOM | 1750Series icengineworksTM Custom Ratio Modeling Block Set Service Charge (Specify Ratio of Blocks-please call) | yes | $75.00 | ||
| 1750AO1 | 1750Series icengineworksTM 20-pcs Modeling Block Add-On Set | yes | $185.00 | ||
| 1750AO2 | 1750Series icengineworksTM 40-pcs Modeling Block Add-On Set | yes | $325.00 | ||
| 1750BA | 1750Series icengineworksTM Modeling Block/Starter Tube Adapter, each | yes | $20.00 | ||